COMMERCIAL COURSES


Whether you are just beginning to learn about engine systems or are an experienced mechanic or technician, we have a course designed to increase your knowledge of Pratt & Whitney engine maintenance and repair.

GP7200

AIRCRAFT: Airbus A380

General Familiarization

Instructor-led course


Level:I
Duration:3 Days
Course Code:7201

What you’ll learn:
You'll learn the basic features and components of the powerplant, its construction and systems operation.

Who can take this course:
  • Commercial Technicians, Instructors and Fleet Engineers who support the GP7200 engine.
  • UTC and Pratt & Whitney employees who support the GP7200 engine. Requires supervisor’s permission.

T1 GP7200 Engine Only for A380 (Line and Base Maintenance)

Instructor-led course


Level:III
Duration:8 Days
Course Code:7203

What you’ll learn:
You'll be provided a detailed description of powerplant system operation, component location, onboard reporting systems and fault isolation procedures to aircraft maintenance manual level.

Who can take this course:
  • Commercial Technicians, Instructors and Fleet Engineers who support the GP7200 engine.
  • UTC and Pratt & Whitney employees who support the GP7200 engine. Requires supervisor’s permission.

Borescope Inspection Procedures

Instructor-led course


Level:IV
Duration:2 Days
Course Code:7200

What you’ll learn:
You will learn general borescope procedures and the use of borescope equipment to detect, interpret and evaluate deterioration and damage in the engine gaspath.

Who can take this course:
  • Commercial Technicians, Instructors and Fleet Engineers who support the GP7200 engine.
  • UTC and Pratt & Whitney employees who support the GP7200 engine. Requires supervisor’s permission.

Engine Split-Ship

Instructor-led course


Engine:GP7200
Duration:3 Days
Course Code:7207

What you’ll learn:
You'll learn the procedures for and gain hands-on experience on how to disassemble and reassemble the GP7200 engine into the Fan Module and Propulsor using the required tools and technical manuals.

Who can take this course:
  • Personnel responsible for performing, and supervising, splitting of the GP7200 engine into the Fan Module and Propulsor for purposes of transporting the engines.

Training Resources


Course Code:GP7000-TR

Description:
This collection of GP7000 training resources includes animated fuel, oil and secondary air and lubrication system schematics.

Who can take this course:
  • Commercial Technicians, Instructors and Fleet Engineers who support the GP7200.
  • UTC and Pratt & Whitney employees who support the GP7200 engine. Requires supervisor’s permission.

PW1100G-JM

AIRCRAFT: Airbus A320NEO

General Familiarization

Instructor-led course


Level:I
Duration:2 Days
Course code:3200

What you’ll learn:
You'll learn the basic features and components of the powerplant, its construction and systems operation.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW1100G-JM.
  • UTC and Pratt & Whitney employees who support the PW1100G-JM. Requires supervisor’s permission.

Line and Base Maintenance

Instructor-led course


Level:III
Duration:8 Days
Course Code:3201

What you’ll learn:
You'll be provided a detailed description of powerplant system operation, component location, onboard reporting systems and fault isolation procedures to aircraft maintenance manual level.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW1100G-JM.
  • UTC and Pratt & Whitney employees who support the PW1100G-JM. Requires supervisor’s permission.

Borescope Inspection Procedures

Instructor-led course


Level:IV
Duration:2 Days
Course Code:3202

What you’ll learn:
You will learn general borescope procedures and the use of borescope equipment to detect, interpret and evaluate deterioration and damage in the engine gaspath.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW1100G-JM.
  • UTC and Pratt & Whitney employees who support the PW1100G-JM. Requires supervisor’s permission.

Compressor Blade Blending

Instructor-led course


Level:IV
Duration:5 Days
Course Code:3203

What you’ll learn:
Upon completion of this class, you will be able to use blade blend equipment to measure, evaluate and repair compressor blades in an on-wing engine based upon in-service limits. Extensive use of blade blending equipment, training demonstrator and worksheets provides you with the essential hands-on experience needed to develop critical investigative, interpretive and mechanical skills.

Who can take this course:
  • Requires Pratt & Whitney source approval.

Engine Change – Bootstrap Method

Instructor-led course


Course Code:3214
Duration:2 Days

What you’ll learn:
Upon completion of this course you will be able to discuss the procedures required to remove and install an engine by the bootstrap method. You will also be able to perform engine bootstrap removal and replacement tasks. This course consists of classroom presentations and discussions of Aircraft Maintenance Manual (AMM) procedures, combined with shop activities that follow the AMM procedures. A training engine, bootstrap kit and pylon are used in the shop for demonstrations and to provide hands-on experience with removal and replacement.

Who can take this course:
  • Personnel responsible for performing and supervising bootstrap engine removal and replacement on A320NEO aircraft.

Bootstrap Visual Guide

Online Training course


Course Code:1100G-JM-VG-Btstrp
Duration:0.5 Hours

What you’ll learn:

Instruction in engine removal and installation of the bootstrap equipment for the PW1100G-JM.


Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW1100G-JM.
  • UTC and Pratt & Whitney employees who support the PW1100G-JM. Requires supervisor’s permission.

Carbon Seal Puller Visual Guide - Main Gearbox

Online Training course


Course Code:PW1100G-JM-3DAnim-Carbonseal

What you’ll learn:

This training provides familiarity with PW1100G-JM carbon seal removal and replacement and tool use.


Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW1100G-JM.
  • UTC and Pratt & Whitney employees who support the PW1100G-JM. Requires supervisor’s permission.

Training Resources


Course Code:1100G-JM-TR

Description:

This collection of PW1100G-JM training resources includes externals, build units, secondary air and lubrication flows and animations.


Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW1100G-JM.
  • UTC and Pratt & Whitney employees who support the PW1100G-JM. Requires supervisor’s permission.

General Familiarization Suite

Learning Path


Course Code:LP-1100G-JM-Int-GF

What you’ll learn:

Introduction to the PW1100G-JM power plant systems and components.


Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW1100G-JM.
  • UTC and Pratt & Whitney employees who support the PW1100G-JM. Requires supervisor’s permission.

PW1200G

AIRCRAFT: MITAC MRJ70/MRJ90

General Familiarization

Instructor-led course


Level:I
Duration:2 Days
Course Code:3100

What you’ll learn:
You'll learn the basic features and components of the powerplant, its construction and systems operation.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW1200G engines.
  • UTC and Pratt & Whitney employees who support PW1200G engines. Requires supervisor’s permission.

Training Resources


Course Code:1200G-TR

Description:
This collection of PW1200G training resources includes externals, build units, secondary air and lubrication flows, and animations.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW1200G engines.
  • UTC and Pratt & Whitney employees who support PW1200G engines. Requires supervisor’s permission.

PW1400G-JM

AIRCRAFT: Irkut MC-21

General Familiarization

Instructor-led course


Level:I
Duration:2 Days
Course Code:3301

What you’ll learn:
You'll learn the basic features and components of the powerplant, its construction and systems operation.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW1400G-JM engine.
  • UTC and Pratt & Whitney employees who support the PW1400G-JM. Requires supervisor’s permission.

Compressor Blade Blending

Instructor-led course


Level:IV
Duration:5 Days
Course Code:3304

What you’ll learn:
Upon completion of this class, you will be able to use blade blend equipment to measure, evaluate and repair compressor blades in an on-wing engine based upon in-service limits. Extensive use of blade blending equipment, training demonstrator and worksheets provides you with the essential hands-on experience needed to develop critical investigative, interpretive and mechanical skills.

Who can take this course:
  • Requires Pratt & Whitney source approval.

Training Resources


Course Code:1400G-JM-TR

Description:
This collection of PW1400G-JM training resources includes externals, build units, secondary air and lubrication flows, and animations.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW1400G-JM engine.
  • UTC and Pratt & Whitney employees who support the PW1400G-JM. Requires supervisor’s permission.

PW1500G

AIRCRAFT: Airbus A220

General Familiarization

Instructor-led course


Level:I
Duration:2 Days
Course Code:3001

What you’ll learn:
You'll learn the basic features and components of the powerplant, its construction and systems operation.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW1500G series engines.
  • UTC and Pratt & Whitney employees who support PW1500G series engines. Requires supervisor’s permission.

Line and Base Maintenance

Instructor-led course


Level:III
Duration:8 Days
Course Code:3003

What you’ll learn:
You'll be provided a detailed description of powerplant system operation, component location, onboard reporting systems and fault isolation procedures to aircraft maintenance manual level.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW1500G series engines.
  • UTC and Pratt & Whitney employees who support PW1500G series engines. Requires supervisor’s permission.

Compressor Blade Blending

Instructor-led course


Level:IV
Duration:5 Days
Course Code:3014

What you’ll learn:
Upon completion of this class, you will be able to use blade blend equipment to measure, evaluate and repair compressor blades in an on-wing engine based upon in-service limits. Extensive use of blade blending equipment, training demonstrator and worksheets provides you with the essential hands-on experience needed to develop critical investigative, interpretive and mechanical skills.

Who can take this course:
  • Requires Pratt & Whitney source approval.

Borescope Inspection Procedures

Instructor-led course


Level:IV
Duration:2 Days
Course Code:3004

What you’ll learn:
You will learn general borescope procedures and the use of borescope equipment to detect, interpret and evaluate deterioration and damage in the engine gaspath.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW1500G series engines.
  • UTC and Pratt & Whitney employees who support PW1500G series engines. Requires supervisor’s permission.

General Familiarization Suite

Learning Path


Course Code:LP-1500G-Int-GF
Duration:1 Day

What you’ll learn:
Introduction to the PW1500G power plant systems and components.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW1500G series engines.
  • UTC and Pratt & Whitney employees who support the PW1500G. Requires supervisor’s permission.

Training Resources


Course Code:1500G-TR

Description:
This collection of PW1500G training resources includes externals, build units, secondary air and lubrication flows, and animations.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW1500G series engines.
  • UTC and Pratt & Whitney employees who support the PW1500G. Requires supervisor’s permission.

Engine Change – Bootstrap Method

Instructor-led course


Course Code:3012
Duration:3 Days

What you’ll learn:
Upon completion of this course you will be able to discuss the procedures required to remove and install an engine by the bootstrap method. You will also be able to perform engine bootstrap removal and replacement tasks. This course consists of classroom presentations and discussions of Aircraft Maintenance Manual (AMM) procedures, combined with shop activities that follow the AMM procedures. A training engine, bootstrap kit and pylon are used in the shop for demonstrations and to provide hands-on experience with removal and replacement.

Who can take this course:
  • Personnel responsible for performing and supervising bootstrap engine removal and replacement on A220 aircraft.

PW1900G

AIRCRAFT: Embraer E-Jet E2

General Familiarization

Instructor-led course


Level:I
Duration:2 Days
Course Code:3400

What you’ll learn:
You'll learn the basic features and components of the powerplant, its construction and systems operation.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW1900G series engines.
  • UTC and Pratt & Whitney employees who support PW1900G series engines. Requires supervisor’s permission.

Line and Base Maintenance

Instructor-led course


Level:III
Duration:8 Days
Course Code:3401

What you’ll learn:
You'll be provided a detailed description of powerplant system operation, component location, onboard reporting systems and fault isolation procedures to aircraft maintenance manual level.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW1900G series engines.
  • UTC and Pratt & Whitney employees who support PW1900G series engines. Requires supervisor’s permission.

Compressor Blade Blending

Instructor-led course


Level:IV
Duration:5 Days
Course Code:3404

What you’ll learn:
Upon completion of this class, you will be able to use blade blend equipment to measure, evaluate and repair compressor blades in an on-wing engine based upon in-service limits. Extensive use of blade blending equipment, training demonstrator and worksheets provides you with the essential hands-on experience needed to develop critical investigative, interpretive and mechanical skills.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW1900G series engines.
  • Requires Pratt & Whitney source approval.

Borescope Inspection Procedures

Instructor-led course


Level:IV
Duration:2 Days
Course Code:3402

What you’ll learn:
You will learn general borescope procedures and the use of borescope equipment to detect, interpret and evaluate deterioration and damage in the engine gaspath.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW1900G series engines.
  • UTC and Pratt & Whitney employees who support PW1900G series engines. Requires supervisor’s permission.

Training Resources


Course Code:1900G-TR

Description:
This collection of PW1900G training resources includes externals, build units, secondary air and lubrication flows, and animations.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW1900G series engines.
  • UTC and Pratt & Whitney employees who support the PW1900G. Requires supervisor’s permission.

PW2000

AIRCRAFT: Boeing B757

General Familiarization

Instructor-led course


Level:I
Duration:2 Days
Course Code:2031

What you’ll learn:
You'll learn the basic features and components of the powerplant, its construction and systems operation.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW2000 series engines.
  • UTC and Pratt & Whitney employees who support PW2000 series engines. Requires supervisor’s permission.

Line and Base Maintenance

Instructor-led course


Level:III
Duration:8 Days
Course Code:2033

What you’ll learn:
You'll be provided a detailed description of powerplant system operation, component location, onboard reporting systems and fault isolation procedures to aircraft maintenance manual level.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW2000 series engines.
  • UTC and Pratt & Whitney employees who support PW2000 series engines. Requires supervisor’s permission.

Borescope Inspection Procedures

Instructor-led course


Level:IV
Duration:2 Days
Course Code:2030

What you’ll learn:
You will learn general borescope procedures and the use of borescope equipment to detect, interpret and evaluate deterioration and damage in the engine gaspath.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support PW2000 series engines.
  • UTC and Pratt & Whitney employees who support PW2000 series engines. Requires supervisor’s permission.

PW4000-94

AIRCRAFT: Boeing B747/767

General Familiarization

Instructor-led course


Level:ATA Level I
Duration:4 Days
Course Code:4000

What you’ll learn:
You'll learn the basic features and components of the powerplant, its construction and systems operation.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW4000 engine.
  • UTC and Pratt & Whitney employees who support the PW4000 engine. Requires supervisor’s permission.

Line and Base Maintenance

Instructor-led course


Level:ATA Level III
Duration:8 Days
Course Code:4003

What you’ll learn:
You'll be provided a detailed description of powerplant system operation, component location, onboard reporting systems and fault isolation procedures to aircraft maintenance manual level.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW4000 engine.
  • UTC and Pratt & Whitney employees who support the PW4000 engine. Requires supervisor’s permission.

Borescope Inspection Procedures

Instructor-led course


Level:ATA Level IV
Duration:2 Days
Course Code:4002

What you’ll learn:
You will learn general borescope procedures and the use of borescope equipment to detect, interpret and evaluate deterioration and damage in the engine gaspath.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW4000 engine.
  • UTC and Pratt & Whitney employees who support the PW4000 engine. Requires supervisor’s permission.

PW4100-94

AIRCRAFT: Airbus A300/310

General Familiarization

Instructor-led course


Level:ATA Level I
Duration:5 Days
Course Code:4100

What you’ll learn:
You'll learn the basic features and components of the powerplant, its construction and systems operation.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW4000 engine.
  • UTC and Pratt & Whitney employees who support the PW4000 engine. Requires supervisor’s permission.

Line and Base Maintenance

Instructor-led course


Level:ATA Level III
Duration:10 Days
Course Code:4103

What you’ll learn:
You'll be provided a detailed description of powerplant system operation, component location, onboard reporting systems and fault isolation procedures to aircraft maintenance manual level.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW4000 engine.
  • UTC and Pratt & Whitney employees who support the PW4000 engine. Requires supervisor’s permission.

Borescope Inspection Procedures

Instructor-led course


Level:ATA Level IV
Duration:2 Days
Course Code:4102

What you’ll learn:
You will learn general borescope procedures and the use of borescope equipment to detect, interpret and evaluate deterioration and damage in the engine gaspath.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW4000 engine.
  • UTC and Pratt & Whitney employees who support the PW4000 engine. Requires supervisor’s permission.

PW4100-100

AIRCRAFT: Airbus A330

General Familiarization

Instructor-led course


Level:ATA Level I
Duration:5 Days
Course Code:4130

What you’ll learn:
You'll learn the basic features and components of the powerplant, its construction and systems operation.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW4000 engine.
  • UTC and Pratt & Whitney employees who support the PW4000 engine. Requires supervisor’s permission.

Line and Base Maintenance

Instructor-led course


Level:ATA Level III
Duration:10 Days
Course Code:4133

What you’ll learn:
You'll be provided a detailed description of powerplant system operation, component location, onboard reporting systems and fault isolation procedures to aircraft maintenance manual level.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW4000 engine.
  • UTC and Pratt & Whitney employees who support the PW4000 engine. Requires supervisor’s permission.

BORESCOPE INSPECTION PROCEDURES

Instructor-led course


Level:ATA Level IV
Duration:2 Days
Course Code:4132

What you’ll learn:
You will learn general borescope procedures and the use of borescope equipment to detect, interpret and evaluate deterioration and damage in the engine gaspath.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW4000 engine.
  • UTC and Pratt & Whitney employees who support the PW4000 engine. Requires supervisor’s permission.

PW4000-112

AIRCRAFT: Boeing B777

General Familiarization

Instructor-led course


Level:ATA Level I
Duration:4 Days
Course Code:4030

What you’ll learn:
You'll learn the basic features and components of the powerplant, its construction and systems operation.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW4000 engine.
  • UTC and Pratt & Whitney employees who support the PW4000 engine. Requires supervisor’s permission.

Line and Base Maintenance

Instructor-led course


Level:ATA Level III
Duration:8 Days
Course Code:4033

What you’ll learn:
You'll be provided a detailed description of powerplant system operation, component location, onboard reporting systems and fault isolation procedures to aircraft maintenance manual level.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW4000 engine.
  • UTC and Pratt & Whitney employees who support the PW4000 engine. Requires supervisor’s permission.

Borescope Inspection Procedures

Instructor-led course


Level:ATA Level IV
Duration:2 Days
Course Code:4032

What you’ll learn:
You will learn general borescope procedures and the use of borescope equipment to detect, interpret and evaluate deterioration and damage in the engine gaspath.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW4000 engine.
  • UTC and Pratt & Whitney employees who support the PW4000 engine. Requires supervisor’s permission.

T2 Blade Corrosion Inspection

Online training course


Course Code:eL-T2Sulf
Duration:0.5 Hours

What you’ll learn:
This training helps operators identify distress modes associated with internal corrosion on the PW4000-112" second stage turbine blade and to be familiar with references to consult during inspection.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support the PW4000 engine.
  • UTC and Pratt & Whitney employees who support the PW4000 engine. Requires supervisor’s permission.

V2500-A5 Engine

AIRCRAFT: Airbus A319/320/321

General Familiarization

Instructor-led course


Level:I
Duration:3 Days
Course Code:2500

What you’ll learn:
You'll learn the basic features and components of the powerplant, its construction and systems operation.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support V2500 series engines.
  • UTC and Pratt & Whitney employees who support V2500 series engines. Requires supervisor’s permission.

Line and Base Maintenance

Instructor-led course


Level:III
Duration:8 Days
Course Code:2506

What you’ll learn:
You'll be provided a detailed description of powerplant system operation, component location, onboard reporting systems and fault isolation procedures to aircraft maintenance manual level.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support V2500 series engines.
  • UTC and Pratt & Whitney employees who support V2500 series engines. Requires supervisor’s permission.

Borescope Inspection Procedures

Instructor-led course


Level:IV
Duration:2 Days
Course Code:2503

What you’ll learn:
You will learn general borescope procedures and the use of borescope equipment to detect, interpret and evaluate deterioration and damage in the engine gaspath.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support V2500 series engines.
  • UTC and Pratt & Whitney employees who support V2500 series engines. Requires supervisor’s permission.

Compressor Blade Blending

Instructor-led course


Level:IV
Duration:4 Days
Course Code:2512

What you’ll learn:
Upon completion of this class, you will be able to use blade blend equipment to measure, evaluate and repair compressor blades in an on-wing engine based upon in-service limits. Extensive use of blade blending equipment, training demonstrator and worksheets provides you with the essential hands-on experience needed to develop critical investigative, interpretive and mechanical skills.

Who can take this course:
  • Company must be source approved by Pratt & Whitney to attend training.

Training Resources


Course Code:V2500-A5-TR

Description:
This collection of V2500-A5 training resources includes externals, build units, and secondary air and lubrication flows.

Who can take this course:
  • Commercial technicians, instructors, and fleet engineers who support V2500 series engines.
  • UTC and Pratt & Whitney employees who support V2500 series engines. Requires supervisor’s permission.

Troubleshooting

Instructor-led course


Course Code:2514
Duration:2 Days

What you’ll learn:
The student will be able to: Understand troubleshooting philosophy; Class/Level of fault messages; Recognize various types of fault acronyms; Complete troubleshooting steps involving ECAM, PFR. MCDU, CFDS, TSM; Fuel, Oil, Air, Starting, Ignition, Power management system overview and possible faults.

Who can take this course:
  • This course is designed for Maintenance Technicians and other personnel associated with line and base maintenance. Personnel attending Level III troubleshooting training should possess the knowledge and experience required to maintain turbine powered transport aircraft.