F100 ENGINE SERIES COURSES


Whether you are just beginning to learn about engine systems or are an experienced mechanic or technician, we have a course designed to increase your knowledge of the repair and maintenance of all models of F100 engines.

F100-PW-220

AIRCRAFT: Boeing F-15/Lockheed-Martin F-16

Engine Familiarization

Instructor-led course


Course Code:1040
Duration:3 Days

What you’ll learn:
This foundational course will teach you the basic facts and general principles of the engine construction, preparing you for further F100-PW-220 training courses.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

F100-220/229 Engine Basics

Instructor-led course


Course Code:1039
Duration:1 Days

What you’ll learn:
An engine introductory course designed for non-technical individuals such as financial, legal, contracts, and support staff. This course contains 1/3 of the information provided in our more standard familiarization.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Engine Blade Inspection & Blending Techniques

Instructor-led course


Course Code:1015
Duration:1 Day

What you’ll learn:
Gain a thorough knowledge and practical experience on performing engine blade inspections and blending.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Interactive Electronic Technical Manual System (IETMS) Familiarization

Instructor-led course


Course Code:1010
Duration:2 Days

What you’ll learn:
Learn the basics on the Intermediate Maintenance Manual System, including general operating principles and procedures of the Interactive Electronic Technical Manual System (IETMS).

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Interactive Electronic Technical Manual System (IETMS) OJT

Instructor-led course


Course Code:1011
Duration:3 Days

What you’ll learn:
This course builds on the Interactive Electronic Technical Manual System (IETMS) Familiarization - 1010 course, building further understanding and experience in the use of the IETMS system.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Intermediate Maintenance OJT

Instructor-led course


Course Code:1020
Duration:55 Days

What you’ll learn:
This course builds on the Intermediate Maintenance course, building further understanding and experience performing tasks you'll encounter in an actual maintenance environment.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Intermediate Maintenance

Instructor-led course


Course Code:1019
Duration:47 Days

What you’ll learn:
Gain the knowledge and experience required to perform intermediate-level maintenance tasks through classroom and hands-on experience.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Engine Borescope/Fiberscope Inspection

Instructor-led course


Course Code:1036
Duration:5 Days

What you’ll learn:
Upon completion you will be able to make damage assessments with the use of borescope equipment and the F100 Engine Technical Order.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Advanced Controls Tester

Instructor-led course


Course Code:1017
Duration:2 Days

What you’ll learn:
This course provides practical instruction on ACT set-up, calibration and use.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Systems and Troubleshooting

Instructor-led course


Course Code:1041
Duration:10 Days

What you’ll learn:
You’ll gain comprehensive training on engine systems operation, diagnostic equipment operation, troubleshooting techniques and Line Replacement Unit maintenance.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Engine Monitoring System Component Repair (EMS)

Instructor-led course


Course Code:1070
Duration:10 Days

What you’ll learn:
This course provides Digital Electronic Engine Control troubleshooting and repair practical skills using the legacy DEFT device.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Intermediate Test Cell Operator

Instructor-led course


Course Code:1042
Duration:10 Days

What you’ll learn:
This course provides classroom instruction on test cell operation and engine limits leading up to actual operation of an engine on the cell.

Who can take this course:
  • Military Technicians who support F100 series engines.

F100-PW-229

AIRCRAFT: Boeing F-15/Lockheed-Martin F-16

Engine Familiarization

Instructor-led course


Course Code:1050
Duration:3 Days

What you’ll learn:
This foundational course will teach you the basic facts and general principles of the engine construction, preparing you for further F100-PW-229 training courses.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

F100-220/229 Engine Basics

Instructor-led course


Course Code:1039
Duration:1 Days

What you’ll learn:
An engine introductory course designed for non-technical individuals such as financial, legal, contracts, and support staff. This course contains 1/3 of the information provided in our more standard familiarization.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Engine Blade Inspection & Blending Techniques

Instructor-led course


Course Code:1015
Duration:1 Day

What you’ll learn:
Gain a thorough knowledge and practical experience performing engine blade inspections and blending.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Interactive Electronic Technical Manual System (IETMS)

Instructor-led course


Course Code:1012
Duration:2 Days

What you’ll learn:
Learn the basics on the Intermediate Maintenance Manual System, including general operating principles and procedures of the Interactive Electronic Technical Manual System (IETMS).

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Interactive Electronic Technical Manual System (IETMS) OJT

Instructor-led course


Course Code:1013
Duration:3 Days

What you’ll learn:
This course builds on the Interactive Electronic Technical Manual System (IETMS) Familiarization - 1012 course, building further understanding and experience in the use of the IETMS system.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Intermediate Maintenance OJT

Instructor-led course


Course Code:1056
Duration:64 Days

What you’ll learn:
This course builds on the Intermediate Maintenance course, building further understanding and experience performing tasks you'll encounter in an actual maintenance environment.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Intermediate Maintenance

Instructor-led course


Course Code:1052
Duration:55 Days

What you’ll learn:
Gain the knowledge and experience required to perform intermediate-level maintenance tasks through classroom and hands-on experience.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Systems and Troubleshooting

Instructor-led course


Course Code:1051
Duration:10 Days

What you’ll learn:
You’ll gain comprehensive training on engine systems operation, diagnostic equipment operation, troubleshooting techniques and Line Replacement Unit maintenance.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Advanced Controls Tester

Instructor-led course


Course Code:1017
Duration:2 Days

What you’ll learn:
This course provides practical instruction on ACT set-up, calibration and use.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Engine Borescope/Fiberscope Inspection

Instructor-led course


Course Code:1037
Duration:5 Days

What you’ll learn:
Upon completion you will be able to make damage assessments with the use of borescope equipment and the F100 Engine Technical Order.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Intermediate Test Cell Operator

Instructor-led course


Course Code:1054
Duration:10 Days

What you’ll learn:
This course provides classroom instruction on test cell operation and engine limits leading up to actual operation of an engine on the cell.

Who can take this course:
  • Military Technicians who support F100 series engines.

Engine Monitoring System Component Repair (EMS)

Instructor-led course


Course Code:1070
Duration:10 Days

What you’ll learn:
This course provides Digital Electronic Engine Control troubleshooting and repair practical skills using the legacy DEFT device.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.