Military COURSES


Whether you're just beginning your career or you're an experienced maintenance technician, you’ll find courses to increase your knowledge of Pratt & Whitney engines and improve your skills.

F100-PW-220

AIRCRAFT: Boeing F-15/Lockheed-Martin F-16

Engine Familiarization

Instructor-led course


Course Code:1040
Duration:3 Days

What you’ll learn:
This foundational course will teach you the basic facts and general principles of the engine construction, preparing you for further F100-PW-220 training courses.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

F100-220/229 Engine Basics

Instructor-led course


Course Code:1039
Duration:1 Days

What you’ll learn:
An engine introductory course designed for non-technical individuals such as financial, legal, contracts, and support staff. This course contains 1/3 of the information provided in our more standard familiarization.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Engine Blade Inspection & Blending Techniques

Instructor-led course


Course Code:1015
Duration:1 Day

What you’ll learn:
Gain a thorough knowledge and practical experience on performing engine blade inspections and blending.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Interactive Electronic Technical Manual System (IETMS) Familiarization

Instructor-led course


Course Code:1010
Duration:2 Days

What you’ll learn:
Learn the basics on the Intermediate Maintenance Manual System, including general operating principles and procedures of the Interactive Electronic Technical Manual System (IETMS).

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Interactive Electronic Technical Manual System (IETMS) OJT

Instructor-led course


Course Code:1011
Duration:3 Days

What you’ll learn:
This course builds on the Interactive Electronic Technical Manual System (IETMS) Familiarization - 1010 course, building further understanding and experience in the use of the IETMS system.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Intermediate Maintenance OJT

Instructor-led course


Course Code:1020
Duration:55 Days

What you’ll learn:
This course builds on the Intermediate Maintenance course, building further understanding and experience performing tasks you'll encounter in an actual maintenance environment.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Intermediate Maintenance

Instructor-led course


Course Code:1019
Duration:47 Days

What you’ll learn:
Gain the knowledge and experience required to perform intermediate-level maintenance tasks through classroom and hands-on experience.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Engine Borescope/Fiberscope Inspection

Instructor-led course


Course Code:1036
Duration:5 Days

What you’ll learn:
Upon completion you will be able to make damage assessments with the use of borescope equipment and the F100 Engine Technical Order.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Advanced Controls Tester

Instructor-led course


Course Code:1017
Duration:2 Days

What you’ll learn:
This course provides practical instruction on ACT set-up, calibration and use.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Systems and Troubleshooting

Instructor-led course


Course Code:1041
Duration:10 Days

What you’ll learn:
You’ll gain comprehensive training on engine systems operation, diagnostic equipment operation, troubleshooting techniques and Line Replacement Unit maintenance.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Engine Monitoring System Component Repair (EMS)

Instructor-led course


Course Code:1070
Duration:10 Days

What you’ll learn:
This course provides Digital Electronic Engine Control troubleshooting and repair practical skills using the legacy DEFT device.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Intermediate Test Cell Operator

Instructor-led course


Course Code:1042
Duration:10 Days

What you’ll learn:
This course provides classroom instruction on test cell operation and engine limits leading up to actual operation of an engine on the cell.

Who can take this course:
  • Military Technicians who support F100 series engines.

F100-PW-229

AIRCRAFT: Boeing F-15/Lockheed-Martin F-16

Engine Familiarization

Instructor-led course


Course Code:1050
Duration:3 Days

What you’ll learn:
This foundational course will teach you the basic facts and general principles of the engine construction, preparing you for further F100-PW-229 training courses.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

F100-220/229 Engine Basics

Instructor-led course


Course Code:1039
Duration:1 Days

What you’ll learn:
An engine introductory course designed for non-technical individuals such as financial, legal, contracts, and support staff. This course contains 1/3 of the information provided in our more standard familiarization.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Engine Blade Inspection & Blending Techniques

Instructor-led course


Course Code:1015
Duration:1 Day

What you’ll learn:
Gain a thorough knowledge and practical experience performing engine blade inspections and blending.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Interactive Electronic Technical Manual System (IETMS)

Instructor-led course


Course Code:1012
Duration:2 Days

What you’ll learn:
Learn the basics on the Intermediate Maintenance Manual System, including general operating principles and procedures of the Interactive Electronic Technical Manual System (IETMS).

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Interactive Electronic Technical Manual System (IETMS) OJT

Instructor-led course


Course Code:1013
Duration:3 Days

What you’ll learn:
This course builds on the Interactive Electronic Technical Manual System (IETMS) Familiarization - 1012 course, building further understanding and experience in the use of the IETMS system.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Intermediate Maintenance OJT

Instructor-led course


Course Code:1056
Duration:64 Days

What you’ll learn:
This course builds on the Intermediate Maintenance course, building further understanding and experience performing tasks you'll encounter in an actual maintenance environment.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Intermediate Maintenance

Instructor-led course


Course Code:1052
Duration:55 Days

What you’ll learn:
Gain the knowledge and experience required to perform intermediate-level maintenance tasks through classroom and hands-on experience.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Systems and Troubleshooting

Instructor-led course


Course Code:1051
Duration:10 Days

What you’ll learn:
You’ll gain comprehensive training on engine systems operation, diagnostic equipment operation, troubleshooting techniques and Line Replacement Unit maintenance.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Advanced Controls Tester

Instructor-led course


Course Code:1017
Duration:2 Days

What you’ll learn:
This course provides practical instruction on ACT set-up, calibration and use.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Engine Borescope/Fiberscope Inspection

Instructor-led course


Course Code:1037
Duration:5 Days

What you’ll learn:
Upon completion you will be able to make damage assessments with the use of borescope equipment and the F100 Engine Technical Order.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

Intermediate Test Cell Operator

Instructor-led course


Course Code:1054
Duration:10 Days

What you’ll learn:
This course provides classroom instruction on test cell operation and engine limits leading up to actual operation of an engine on the cell.

Who can take this course:
  • Military Technicians who support F100 series engines.

Engine Monitoring System Component Repair (EMS)

Instructor-led course


Course Code:1070
Duration:10 Days

What you’ll learn:
This course provides Digital Electronic Engine Control troubleshooting and repair practical skills using the legacy DEFT device.

Who can take this course:
  • Military Technicians who support F100 series engines.
  • UTC and Pratt & Whitney employees who support F100 series engines. Requires supervisor’s permission.

F117-PW-100

AIRCRAFT: Boeing C-17

System Familiarization

Instructor-led course


Level:ATA I
Duration:3 Days
Course Code:7000

What you’ll learn:
You will be able to discuss the basic features of the F117-PW-100 power plant, its construction and systems operation. The course consists of classroom presentations and, if possible, shop explanations.

Who can take this course:
  • Military Technicians who support F117 engines.
  • UTC and Pratt & Whitney employees who support F117 engines. Requires supervisor’s permission.

Line and Base Maintenance

Instructor-led course


Level:ATA III
Duration:5 Days
Course Code:7003

What you’ll learn:
Gain knowledge and understanding of engine design features, line replacement unit (LRU) identification, engine operation characteristics, systems operation and rigging and inspection.

Who can take this course:
  • Military Technicians who support F117 engines.
  • UTC and Pratt & Whitney employees who support F117 engines. Requires supervisor’s permission.

Borescope Inspection Procedures

Instructor-led course


Level:ATA IV
Duration:2 Days
Course Code:7002

What you’ll learn:
Through practical exercises using borescope equipment, training engine, mockups and worksheets, you’ll develop critical investigative and interpretive skills to evaluate engine gaspath condition.

Who can take this course:
  • Military Technicians who support F117 engines.
  • UTC and Pratt & Whitney employees who support F117 engines. Requires supervisor’s permission.

F119-PW-100

AIRCRAFT: Lockheed-Martin F-22

Engine Familiarization

Instructor-led course


Course Code:1080
Duration:3 Days

What you’ll learn:
Master the basics and general principles of the F119 engine including engine construction, engine systems and operational overview.

Who can take this course:
  • Military Technicians who support F119 engines.
  • UTC and Pratt & Whitney employees who support F119 engines. Requires supervisor’s permission.

F119-100 Engine Basics

Instructor-led course


Course Code:1083
Duration:1 Days

What you’ll learn:
An engine introductory course designed for non-technical individuals such as financial, legal, contracts, and support staff. This course contains 1/3 of the information provided in our more standard familiarization.

Who can take this course:
  • Military Technicians who support F119 engines.
  • UTC and Pratt & Whitney employees who support F119 engines. Requires supervisor’s permission.

Engine Advanced Systems

Instructor-led course


Course Code:1086
Duration:3 Days

What you’ll learn:
Gain an in-depth understanding of F119 engine systems (lubrication, electrical, fuel and control) as they pertain to engine operation.

Who can take this course:
  • Military Technicians who support F119 engines.
  • UTC and Pratt & Whitney employees who support F119 engines. Requires supervisor’s permission.

Engine Borescope/Fiberscope Inspection

Instructor-led course


Course Code:1081
Duration:4 Day

What you’ll learn:
Conduct inspections at all access ports in this hands-on event.

Who can take this course:
  • Military Technicians who support F119 engines.
  • UTC and Pratt & Whitney employees who support F119 engines. Requires supervisor’s permission.

F135-PW-100/600

AIRCRAFT: Lockheed-Martin F-35

F135-100/600 Engine Basics

Instructor-led course


Course Code:1312
Duration:1 Days

What you’ll learn:
An engine introductory course designed for non-technical individuals such as financial, legal, contracts, and support staff. This course contains 1/5 of the information provided in our more standard familiarization.

Who can take this course:
  • Military Technicians who support F135 series engines.
  • UTC and Pratt & Whitney employees who support F135 series engines. Requires supervisor’s permission.

CTOL Familiarization/Systems

Instructor-led course


Course Code:1305
Duration:4 Days

What you’ll learn:
Learn the basics and general principles of the F135 CTOL/CV engine. This course covers two F-35 aircraft variants. Course content also includes the concepts of the engine’s maintenance, engine modules and engine systems.

Who can take this course:
  • Military Technicians who support F135 series engines.
  • UTC and Pratt & Whitney employees who support F135 series engines. Requires supervisor’s permission.

STOVL Familiarization/Systems

Instructor-led course


Course Code:1304
Duration:5 Days

What you’ll learn:
Learn the basics and general principles of the F135 STOVL engine. This course covers the propulsion system of the Short Take Off and Vertical Landing variant of the F-35 aircraft. Course content also includes the concepts of the engine’s maintenance, engine modules and engine systems.

Who can take this course:
  • Military Technicians who support F135 series engines.
  • UTC and Pratt & Whitney employees who support F135 series engines. Requires supervisor’s permission.

Borescope/Fiberscope Inspection OJT

Instructor-led course


Course Code:1309
Duration:5 Days

What you’ll learn:
Learn to make damage assessments using borescope equipment and the F135 AFS Sheets. Conducted at customer location using customer engine.

Who can take this course:
  • Military Technicians who support F135 series engines.

First Stage Blade Blending

Instructor-led course


Course Code:1310
Duration:2 Days

What you’ll learn:
Learn the various areas of the 1st IBR, repairable limits, damage assessment/measurement and tools within the F135 program blade blend kit. Perform three types of blends on a high fidelity F135 inlet training device.

Who can take this course:
  • Military Technicians who support F135 series engines.
  • UTC and Pratt & Whitney employees who support F135 series engines. Requires supervisor’s permission.

V2500-E5 Engine

AIRCRAFT: Embraer KC-390

GENERAL FAMILIARIZATION

Instructor-led course


Level:I
DURATION:X
Course Code:2602

What you’ll learn:
You'll learn the basic features and components of the powerplant, its construction and systems operation.

Who can take this course:
  • Military Technicians who support V2500-E5 engines.
  • UTC and Pratt & Whitney employees who support V2500-E5 series engines. Requires supervisor’s permission.

Borescope Inspection Procedures

Instructor-led course


Level:IV
DURATION:2 Days
Course Code:2601

What you’ll learn:
You will learn general borescope procedures and the use of borescope equipment to detect, interpret and evaluate deterioration and damage in the engine gaspath.

Who can take this course:
  • Military Technicians who support V2500-E5 engines.
  • UTC and Pratt & Whitney employees who support V2500 series engines. Requires supervisor’s permission.

Line and Base Maintenance

Instructor-led course


Level:III
DURATION:8 Days
Course Code:2600

What you’ll learn:
You'll be provided a detailed description of powerplant system operation, component location, onboard reporting systems and fault isolation procedures to aircraft maintenance manual level.

Who can take this course:
  • Military Technicians who support V2500-E5 engines.
  • UTC and Pratt & Whitney employees who support V2500 series engines. Requires supervisor’s permission.